Services
Design Development
When planning your pool it is important to consider your choice of finishes at an early stage – ideally prior to the construction of the pool shell.
This will enable pool fittings to be positioned with the correct degree of tolerance to allow the precise finishing of the Pool Bead around the fittings.
It will also enable the choice of finish for the pool freeboard – assuming your pool is not to have level deck water – which could combine Limestone, slate or sandstone – often in the same stone as the copings.
Alternatively, many pools have used Pool Bead for the freeboard and the reflections from the glass beads look sensational, particularly on outdoor pools in the sunshine.
We will liaise closely with your Architect or pool contractor to provide all design development advice regarding the pool finishing.
Our design department will complete detailed drawings as required and the full specification for preparatory works, prior to the completion of pebbling.
We are happy to meet clients to present our products and can usually arrange for a visit to a local Pool Bead pool to view this exceptional product.
If you have an existing pool which requires renovating, Pool Bead will be the ideal solution. We can often apply the Pool Bead directly onto the existing pool surface, but this must be carefully inspected to ensure that it is secure.
The Pool Bead application can be completed in days and will be cost-effective and give the appearance of a new pool.